The materials we use were formulated for the refinishing industry and have been proven effective through years of use and experience. Our warranty is NOT based on a HOPE that the surface will last. It is supported by proof through long term application.
| Our Process In Brief: First the surface is thoroughly cleaned with industrial cleaners to remove any soap scum, mineral buildup etc. Then, any chips, holes, cracks and damaged areas are repaired and filled with special fillers to make the surface smooth and even. The entire surface is sanded and then etched and primed with a two part bonding agent to ensure an excellent bond with the finish. Once fully prepared the surface is sprayed with a high-tech acrylic coating that hardens to form a new shiny surface that looks and feels like the original porcelain. |
Details of our Process
The exact process varies somewhat on the type and condition of the surface, but here are the essential steps involved.
0. The room is prepared with ventilation, and masking applied to surfaces to ensure no damage or permanent overspray on surfaces not being refinished. Ventilation is by a ducted exhaust, providing a rapid removal of fumes from the space for safety reasons. It is advised that all valuables be removed from the room ahead of time to help ensure no accidental loss or damage occurs.
1. The surface is thoroughly cleaned to remove any soap and dirt residue and any mineral build up or other contaminants.
2. The porcelain surface is sanded and etched with a strong acid. Acid etch is skipped by some refinishers as it is hazardous and not something that should be performed by inexperienced or untrained applicators. But this step is required to create the best possible bond. Fiberglass surfaces are simply prepared using abrasives since acid is not effective on plastic type surfaces.
3. Any chips or cracks in the surface are repaired using fillers, or fiberglass resin in the case of a fiberglass fixture. These repairs are sanded to a smooth even finish.
4. Next we apply a two part bonding agent. This step is also often skipped by other applicators, or used instead of the etching step. Some times a "primer" is used by other companies as the only bond promoter available to them. Our specially formulated bonding agent penetrates the surface and bonds chemically with the surface and our coating, providing a strong and permanent bond between the old surface and the new coating. This bonding agent is so effective that etching, as in step 2 above, is technically an optional step, however we etch all porcelain surfaces AND use our boding agent to maximize the durability and permanence of our coating.
5. The top coat we apply is a two part material that includes a catalyst. The standard colors are white and almond but you can order any a custom color you want ahead of time. Once applied, the coating cures to a very had finish within 48 hours, and reaches full hardness in about a week. We suggest being gentle the first week while the coating is still reaching a full cure. There are additives we can use that significantly speed up the curing process, but these are used on an as-needed or requested basis. If you need to use the surface the same day, tell this to the sales person or technician and he will modify the coating for a rapid cure.
The result is a smooth porcelain-like finish that is hard and durable.
Masking is removed either immediately, or where removal might cause damage to the surface, left for later removal when the surface has cured.
A care and maintenance sheet is normally left at the site. This sheet should be followed to maximize the life of the surface and to honor the conditions of our warranty.
We are happy to answer any questions about the process. Give us a call.
If you have any questions, would like an estimate or to place your order, give us a call.
Remember our toll free number (800)55-PACIFIC
or call (818) 541-0404
Our knowledgeable and friendly office staff are ready and happy to assist you.
CONTACT US ONLINE: You can also request an estimate or ask a question online.
ORDER ONLINE: Experienced customers can immediately place an order online at any time of day or night, and we’ll simply call you or your tenant later on to confirm scheduling.
* See our warranty statement for details. Note that kitchen and laundry sinks do not carry the same 5 year warranty due to the abuse they are commonly subject to. However our workmanship is always guaranteed in case of any error in the application process. Refinished kitchen sinks can last many years when care and maintenance suggestions are followed.